Divide a year's field, truck and fixed costs by the hours that can be billed, divide by one minus the target margin, then price each task as hours times that rate plus marked-up parts.
A plumbing flat rate starts from the cost of a billable hour: a year's field, truck and fixed costs divided by billable hours. In the worked case $1,416,960 over 8,704.8 hours is $162.78 an hour; at a 15 percent target margin the selling rate is $192, and a tank water heater (4 hours, $1,150 of parts) prices at $2,608.
Worked in full in The Plumbing Company Owner by Julian R. Sterling.Get the DRM-free PDF, $19.99 →or the paperback
Free: the Plumbing Company Flat-Rate Price and Break-Even Planner in Excel, with the price build and the break-even of the book's case.
A plumbing flat-rate price is task hours times a selling rate, plus parts times one plus the markup. The selling rate comes from the cost of a billable hour: the full cost of the technicians, the trucks and the fixed costs for a year, divided by the hours the technicians can actually bill, then divided by one minus the target margin. The margin is divided out of the cost, not added on top.
The worked case is Drevington Plumbing & Drain, the fictional company of the book, which built its flat rate in September 2025 from budget inputs set before the year began. Each technician is paid 45 hours a week, 2,340 a year, and 62 percent of those hours are billable: 1,450.8 each. Every figure is a teaching assumption, not a market norm.
| Line | Price build of September 2025 | $ |
|---|---|---|
| Field | 6 technicians × $96,856 | 581,136 |
| Trucks | 6 trucks × $23,700 | 142,200 |
| Fixed costs | 12 × $57,802 | 693,624 |
| Total cost a year | sum | 1,416,960 |
| Billable hours | 6 × 2,340 × 62% | 8,704.8 |
| Cost per billable hour | total / hours | $162.78 |
| Selling rate | $162.78 / (1 − 15%) | $192 |
Cost per billable hour = $1,416,960 / 8,704.8 = $162.78
Selling rate = $162.78 / 0.85 = $192 an hour, rounded to the dollar
The full cost of a technician, $96,856, is the wage at 40 hours plus 5 overtime hours, the payroll burden and benefits. The full cost of a truck, $23,700, is its operating cost plus $9,000 of depreciation. The fixed costs, $57,802 a month, carry the office, the rent, the overhead lines, the owner's salary and burden and two apprentices: everything that is paid whether the phone rings or not.
The trap: dividing by paid hours instead of billable hours. On 2,340 paid hours the same cost would make $100.92 an hour, and every price built on it would leave the drive time, the parts runs and the callbacks unpaid.
Tank water heater = 4 hours × $192 + $1,150 × 1.60 = $2,608
Repair = 1.5 hours × $192 + $45 × 1.60 = $360
Before the switch the company billed time and materials at $165 an hour, collected on about 90 percent of task hours, with parts at cost plus 50 percent and a $59 trip fee on every call. The same tasks, priced both ways:
| Job | Task hours | Parts ($) | Time and materials, FY2025 ($) | Flat rate, FY2026 ($) |
|---|---|---|---|---|
| Repair | 1.5 | 45 | 290 | 360 |
| Drain clearing | 1.25 | 8 | 198 | 253 |
| Tank water heater replacement | 4 | 1,150 | 2,319 | 2,608 |
| Tankless water heater | 9 | 2,600 | 5,237 | 5,888 |
| Sewer camera inspection | 1.25 | 0 | 186 | 240 |
A flat rate moves the risk of a slow job from the customer to the company, which is why it starts from what an hour really costs. In the case the trip fee became an $89 diagnostic fee charged only when no work is approved.
At a 20 percent target margin the cost per billable hour stays at $162.78, the selling rate becomes $203 and the tank water heater $2,652. Only the hours part of the price moves; the parts and their markup stay where they were.
A price is only as good as the calls behind it. With an average ticket of $650 on a converted call, 84 percent conversion, parts at 22 percent of the ticket and 6 percent for card fees, commissions and financing, each call leaves $393.12. The price build's $1,416,960 a year then breaks even at $1,416,960 / 12 / $393.12 = 300.4 calls a month, against 375.0 planned. On the closed year FY2026, with the case's own split of fixed and variable costs, the company needed 353.4 calls a month and ran 412.8.
Figures checked on 18 November 2026. The company in the examples is fictional, and its calls, prices, pay and costs are teaching assumptions, not market norms or the rule of any state. Not legal, tax or accounting advice.
Task hours times the selling rate, plus parts times one plus the markup. In the case a tank water heater is 4 x $192 + $1,150 x 1.60 = $2,608.
Add the full cost of the technicians, the trucks and the fixed costs for a year and divide by the hours the technicians can bill. In the case $1,416,960 / 8,704.8 = $162.78.
Because a margin is a share of the price, not of the cost. $162.78 / 0.85 = $192 leaves 15 percent of the price; adding 15 percent to the cost would leave less.
Divide the year's costs by twelve and by what each call leaves after parts and selling costs. In the case's price build that is 300.4 calls a month; on its closed FY2026, 353.4.
This article is one calculation from The Plumbing Company Owner, a practitioner’s guide to running a plumbing business by the numbers: service calls and flat-rate pricing, water heaters and drains, technician pay, trucks and inventory, maintenance memberships, cash flow, break-even and what the company is worth, with seven workbooks.
DRM-free PDF, $19.99 · Paperback, $32.99, shipped worldwide · Free Excel planner