Articles

How to price flooring installation per square foot

Price material with the waste counted, labor by the square foot and the extras per job, then check what each job leaves per crew-day, not only per square foot.

Price a flooring job as square feet times material and labor per square foot, plus the extras per job. In the worked case, a 620 square foot vinyl plank job comes to $4,856, or $7.83 a square foot all in, and leaves $1,884 after materials, fees, lead cost and the crew's time: $1,256 per crew-day.

Worked in full in The Flooring Company Owner by Julian R. Sterling.Get the DRM-free PDF, $19.99 →or the paperback

Free: the flooring company business model in Excel, with the whole Brindlemere case: prices per square foot by kind of floor, materials and waste, contribution per crew-day, the W-2 crew against the subcontracted installer, the P&L with reported and adjusted EBITDA, break-even, the cash floor and two offers for the company.

The three parts of a flooring price

A flooring quote has three parts: the material, billed by the square foot with a waste allowance ordered above the measured area; the installation labor, billed by the square foot; and the extras, billed per job, for tear-out and haul-away, floor preparation, underlayment and trim. The price per square foot "all in" is the whole quote divided by the measured square feet. The figures below are a fictional company's.

Fictional case. Price = square feet × (material + labor per square foot) + extras; the waste is in the material bought, not in the square feet billed.
Kind of floor, Brindlemere (case)Material, per sq ftWaste orderedLabor, per sq ftExtras, per jobTypical jobPriceAll in, per sq ft
Vinyl plank and laminate$4.1010%$2.70$640620 sq ft$4,856$7.83
Hardwood$8.4010%$4.20$880680 sq ft$9,448$13.89
Tile$5.6012%$9.25$760300 sq ft$5,215$17.38
Builder work (contract price)$2.857%$1.85$1801,150 sq ft$5,585$4.86

On vinyl plank, for instance: 620 square feet × ($4.10 + $2.70) + $640 = $4,856, or $7.83 a square foot all in. The material billed at $4.10 costs $2.55 at the distributor, and the company buys 10% more than it measured: a markup of 46.2% on the material bought, but a margin of only 31.6% on the material billed. Markup and margin are not the same number.

Example 1: a vinyl plank job, line by line

Fictional case; the W-2 crew takes 1.5 crew-days, $1,256 of contribution per crew-day.
Worked job 1: 620 sq ft of rigid vinyl plank, carpet torn outW-2 crewSubcontracted installer
Price quoted and billed$4,856$4,856
Materials at cost, waste included$1,739$1,739
Extras at cost (disposal, underlayment, adhesive, trim)$190$190
Card and financing fees$153$153
Lead cost per job signed$80$80
Fuel$36$0
Installation labor (crew's loaded time, or $1.65 a sq ft to the subcontractor)$774$1,023
Contribution$1,884 (38.8%)$1,671 (34.4%)

The case takes a deposit of 50% at signing ($2,428 here) and the balance at completion. A contract signed in the customer's home may fall under the federal cooling-off rule, which lets the buyer cancel until midnight of the third business day (16 CFR Part 429); the case orders the material only after that window has passed.

Example 2: when tile is priced too low

Tile looks expensive at $17.38 a square foot, but it takes 3.0 crew-days for 300 square feet and leaves $667 per crew-day, against $1,256 for vinyl plank. For the average tile job to pay a crew-day as well as vinyl plank, the tile labor price would have to rise from $9.25 to $15.33 a square foot: $1,824 more per job, or $23.46 a square foot all in. The owner then decides whether to raise the price, take less tile, or accept tile as a door-opener for the rest of the house.

Example 3: the subfloor that was not priced

Worked job 2 is 680 square feet of engineered hardwood sold at $9,448. Done in 2.5 crew-days as quoted, it leaves $3,384 (35.8%), or $1,354 per crew-day. If the old subfloor needs a full extra crew-day that the quote did not carry, the price stays at $9,448 but the crew and fuel cost more, and the job leaves $2,845 (30.1%), or $813 per crew-day. The fix is in the measure: look at the subfloor, test the slab, and put floor preparation in the quote as a line.

The trap: an old floor in an old house. Federal construction rules (29 CFR 1926.1101) require asphalt and vinyl flooring installed no later than 1980 to be treated as containing asbestos unless the employer determines that it does not. The case has the old floor sampled and tested before any tear-out and bills the test at cost ($450 on its tile kitchen, a $5,665 job); apartment buildings may also fall under the EPA's asbestos rules (40 CFR Part 61, Subpart M). What a real job requires is for counsel and a qualified consultant.

Sources

  1. 16 CFR Part 429, Cooling-off period for sales made at homes or certain other locations
  2. 29 CFR 1926.1101, Asbestos (construction)
  3. 40 CFR Part 61, Subpart M, National emission standard for asbestos

Rules read on the eCFR and sba.gov in November 2026; figures checked on 20 November 2026. Every price, wage, cost and multiple on this page is an illustrative assumption of a fictional company, not market data, and nothing here is legal, tax, employment, safety, insurance or licensing advice.

Questions readers ask

How much do flooring installers charge per square foot?

It varies by floor, region and company, and the book gives no market figure. In the fictional case, installation labor is priced at $2.70 a square foot for vinyl plank, $4.20 for hardwood and $9.25 for tile, on top of material and per-job extras.

How much waste should I add to a flooring order?

The case orders 10% above the measured area for vinyl plank and hardwood, 12% for tile and 7% for builder work, and prices the material bought, not only the area billed. Room shape and pattern change the figure.

Is a higher price per square foot always more profitable?

No. Tile at $17.38 a square foot leaves $667 per crew-day in the case, while hardwood at $13.89 leaves $1,354. What pays is contribution per crew-day.

Should a flooring company use subcontracted installers?

On worked job 1, a subcontractor at $1.65 a square foot leaves $1,671 against $1,884 for the W-2 crew, but frees a crew-day. Whether an installer is truly independent is a legal test; counsel checks it.

Read the whole book

This article is one calculation from The Flooring Company Owner, a practitioner’s guide to starting, buying, running and selling a flooring installation company: the in-home measure and the quote, pricing per square foot, materials and waste, crews and subcontracted installers, old floors and moisture, builder work and retainage, cash flow and valuation.

Also on this site