Articles

How to price a roofing job per square

Build the direct cost per square from the measured roof, add fixed costs per job and percentage costs, then price for the margin the company needs.

In the worked case, a 28-square retail roof costs $381.14 a square in materials, crew labor, disposal, commission and warranty reserve. Sold at $585 a square, it leaves $5,708.20 of gross profit, 34.8%, before the cost of the lead and overhead.

Worked in full in The Roofing Company Owner by Julian R. Sterling.Get the DRM-free PDF, $19.99 →or the paperback

Free: the roofing business model in Excel, with the whole Summit Ridge case: job costing per square, lead funnel, P&L, crews, storm normalization, plan and valuation.

Build the cost of a square first

Roofers measure, buy, install and pay by the square, 100 square feet of roof surface. A price per square only makes sense against the direct cost per square, built from the measured roof and the crew rate, plus the costs that are fixed per job and the costs that are a percentage of the price.

Summit Ridge Roofing, fictional case, case assumptions.
Retail job, 28 squaresPer jobPer square
Materials$5,180$185
Crew labor (tear-off and install)$2,940$105
Disposal and permit$750
Commission (10% of price)$1,638
Warranty reserve (1%)$163.80
Direct cost$10,671.80$381.14
Price$16,380$585
Gross profit$5,708.20$203.86

Example 1: what the price per square must pay for

At $585 a square, the roof leaves $203.86 of gross profit per square, $5,708.20 on the job (34.8%). That gross profit must pay for the lead ($982.14 per job sold in the case) and for overhead. Working backward from overhead and the squares the company expects to install gives the margin each square has to carry.

Price per square = direct cost per square ÷ (1 − target gross margin), with fixed costs per job spread over the job's squares and a minimum job price for small roofs.

The trap: markup is not margin. Marking cost up by half gives a margin of one third of the price. And fixed costs per job, such as disposal and permit, make small roofs far more expensive per square than large ones.

Example 2: testing a 3% increase

Raising the retail price 3%, from $585 to $602.55 a square, adds $491.40 to the job and $437.35 of gross profit after commission and warranty. On 210 jobs that is $91,843 a year if none are lost. The same total gross profit is reached at 195.1 jobs, so the increase pays as long as the close rate stays above 21.7%, against 23.3% today.

Discounts work the same way in reverse. A 5% discount on the average roof is $819; with reps paid 10% of the price, the rep bears $82 of it and the company $729. A profit-share commission plan makes the rep bear $181.

Sources

  1. 16 CFR Part 429, Rule Concerning Cooling-Off Period for Sales Made at Homes or Certain Other Locations
  2. IRS, Independent contractor (self-employed) or employee?

Figures checked on 18 November 2026. Illustrative case assumptions, not market data, and not legal, tax, insurance or licensing advice. The company in the examples is fictional.

Questions readers ask

How do roofers calculate price per square?

They build the direct cost from the measured roof (materials with waste, crew labor per square and adders), add per-job costs such as disposal and permit and percentage costs such as commission, and price for a target gross margin.

What does a roofing crew get paid per square?

Rates vary by market, pitch and roof type. The worked case assumes $105 a square for tear-off and installation on a standard roof, with adders for steep pitch, layers and decking.

Should a small roof cost more per square?

Yes. Costs fixed per job, such as disposal and permit ($750 in the case), weigh more per square on a small roof; most companies set a minimum job price.

Will a price increase lose jobs?

Calculate the close rate at which it stops paying. In the case, a 3% increase pays as long as the close rate stays above 21.7%.

Read the whole book

This article is one calculation from The Roofing Company Owner, a practitioner’s guide to starting, running and selling a residential roofing company: licensing, pricing per square, leads and commissions, crews, storm and insurance work, cash flow and valuation.

Also on this site